Mercusys MR27BE - Page 70

60
Chapter 4 Congure the Router in Wireless Router Mode
3. In Client IP Address, enter the range of IP addresses (up to 10) that can be leased
to the devices by the PPTP VPN server.
4. Set the PPTP connection permission according to your needs.
• Select Allow Samba (Network Place) access to allow your VPN device to
access your local Samba server.
• Select Allow NetBIOS passthrough to allow your VPN device to access your
Samba server using NetBIOS name.
• Select Allow Unencrypted connections to allow unencrypted connections
to your VPN server.
5. Click SAVE then congure the PPTP VPN connection account for the remote device,
you can create up to 16 accounts.
1 ) Click Add.
2 ) Enter the Username and Password to authenticate devices to the PPTP VPN
Server.
3 ) Click ADD to save the information.