Merlin Gerin PowerLogic 2000 Series User Manual

Bulletin No. 3020IB9814
December 1998
44
Figure 4-2: Flowchart for front panel configuration
Use the SELECT
METER keys to
change the value.
Press the
MODE key
once.
Do you want
to change
another
value?
CM accepts changes
and restarts.
Press SELECT
METER key.
Do you want
to accept the
changes?
Press the PHASE
[Enter] key.
The CM leaves
Configuration mode.
Press the PHASE
[Enter] key to
move to the value
to be changed.
YES
NO
YES
NO
Press the PHASE
[Enter] key.
Press the MODE
key until the
[Setup] LED is lit.
Press the PHASE
[Enter] key to enter
Configuration mode.
Use the SELECT
METER keys to
display the
password. Then
press the PHASE
[Enter] key.
The CM enters
Configuration mode.
START

Merlin Gerin PowerLogic 2000 Series Specifications

General

Brand	Merlin Gerin
Model	PowerLogic 2000 Series
Category	Monitor
Language	English