METREL EurotestCOMBO MI 3125 User Manual

MI 3125 / BT EurotestCOMBO Instrument operation
28
R ISO
No limit
Utest = 500 V
Low Ohm Resistance
R LOW
No limit
CONTINUITY
No limit
Z - LINE
Fuse type: none selected
VOLTAGE DROP
ΔU: 4.0 %
Z
REF
: 0.00 Ω
Z - LOOP
Fuse type: none selected
Zs rcd
Test current: standard
Fuse type: none selected
RCD
RCD t
Nominal differential current: I
N
=30 mA
RCD type: AC
non-delayed
Test current starting polarity: (0)
Limit contact voltage: 50 V
Current multiplier: 1
Note:
 Initial settings (reset of the instrument) can be recalled also if the TAB key is
pressed while the instrument is switched on.

METREL EurotestCOMBO MI 3125 Specifications

General

Brand	METREL
Model	EurotestCOMBO MI 3125
Category	Measuring Instruments
Language	English