Metrohm 930 Compact IC Flex User Manual

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
4 Installation
930 Compact IC Flex Oven/SeS/PP (2.930.2500)
￭￭￭￭￭￭￭￭
53
Accessories For this step, you need the following accessories:
￭ Guard column (suitable for separation column)
Connecting the guard column
1 2 3
6.2744.070
6.2744.040
6.2744.070
6.2744.070
1
Removing the coupling
Remove the coupling (6.2744.040) installed between the column
inlet capillary and the column outlet capillary for the initial start-up.
2
Preparing the guard column
￭ Remove the stoppers or the stopper and the sealing cap from the
guard column.
3
Connecting the guard column
CAUTION
When inserting the guard column, ensure that it is inserted cor-
rectly based on the marked flow direction (if specified).
￭ Fasten the inlet of the guard column to the column inlet capillary
using a short pressure screw (6.2744.070).
￭ If the guard column is connected to the separation column using
a connection capillary, fasten this connection capillary to the
guard column outlet with a pressure screw.
Rinsing the guard column
1
Rinsing the guard column
￭ Place a beaker under the guard column's outlet.

Metrohm 930 Compact IC Flex Specifications

General

Brand	Metrohm
Model	930 Compact IC Flex
Category	Laboratory Equipment
Language	English