Metronix ARS 2100 SE Series User Manual

Page 132
Error message Meaning of the error message Measures
Main
index
Sub
index
38 0 sercos prog.: SERCON
initialisation error
Technology module defective?
Replace the technology module.
If necessary, contact the Technical Support.
1 Sercos:
no technology module present
Technology module plugged in correctly?
Technology module defective?
Replace the technology module.
If necessary, contact the Technical Support.
2 Sercos:
defective technology module
Replace the technology module.
If necessary, contact the Technical Support.
3 Sercos:
S-0-0127: invalid data in S-0-
0021
Check the configuration (cyclic data for MDT and
AT).
Time slot calculation by the master.
4 Sercos:
S-0-0127: illegal IDNs in AT or
MDT
Check the configuration (cyclic data transfer).
5 Sercos:
S-0-0128: invalid data in S-0-
0022
Check the weighting settings.
Check the operating mode settings.
Check the internal/external angle encoder
settings.
6 Sercos:
S-0-0128: faulty weighting
parameters
Check the weighting settings.
7 Sercos:
Invalid IDN in S-0-0026 / S-0-
0027
Check the configuration of the signal status and
signal control word (S-0-0026 / S-0-0027).
8 Sercos:
error during the conversion
Check the weighting settings.
If necessary, contact the Technical Support.
9 Sercos:
SERCON 410b mode active
Technology module defective?
Replace the technology module.
Product Manual „Servo drives ARS 2100 SE“ Version 5.0

Metronix ARS 2100 SE Series Specifications

General

Brand	Metronix
Model	ARS 2100 SE Series
Category	Servo Drives
Language	English