ML-6
MevaLite
The poly-propylene and aluminum
composite forming face has all
the positive properties of plywood
plus important advantages: longer
life span, greater load-bearing
capacity, better nail-holding ability,
fewer and easier repairs, 100 %
recyclability.
Besides the obvious advantages,
such as considerably reduced
cleaning effort, minimum
consumption of release agent
and an excellent concrete finish,
alkus offers substantial ecological
benefits. Substituting plastic
for wood saves valuable timber
resources. Also, the release of
highly toxic dioxin is avoided,
which is released in the pro cess of
burning plywood (that is bonded
with phenolic resin). Used or
damaged alkus plastic sheets can
be recycled into the same product.
It is 100% recyclable, and the
manufacturer guarantees reaccept-
ance.
Fig. 6.3: Composite alkus plastic sheet structure
Frame profile + plywood face Frame profile + alkus sheet
Fig. 6.1: Negative impression in the concrete when using
panels with a conventional plywood face
Fig. 6.2: Smooth and even concrete surface as there is no
projecting profile of the panel frame
Plastic layer
Aluminum layer
Foamed plastic core
Aluminum layer
Plastic layer
The alkus Sheet
Wall formwork
Technical Instruction Manual / June 2022
To Next Page
Loading...
