Meva MevaLite - Drive Nut 60; Flange Screw 18;28; ML-Tensioning Screw

ML-76
MevaLite
Wall formwork
Technical Instruction Manual - Product list / June 2022
Drive nut 60
galvanized; DW thread Ø 5/8" (15 mm),
plate Ø 2-3/8" (60 mm)
safe working load = 21.9 K @ 2:1 safety factor
Is used to tie the formwork to the ground or to a
wall connection
ML-tensioning screw
to connect two ML-multi-purpose panels at an
angle of 90° with each other
29-900-23 ................Drive nut 60 ..........................................................................1.1
Ref.-No. Description / Application lb
29-210-80 ................ML-tensioning screw .............................................................2.6
7 1/2”
9 3/8”
4”
3 5/16”3”
1 7/8”
1 1/8”
DW 5/8"
Ø 2-3/8"
2"
29-401-10 ................Flange screw 18 ....................................................................2.4
29-401-12 ................Flange screw 28 ....................................................................2.7
galvanized; to attach steel rails, scaffolding
brackets and formwork-prop connectors etc.;
length of thread: 7” for flange screw 18
and 10.5“ for flange screw 28.
Flange screw 18/28 Ref.-No. Description / Application lb
2”4”
7” (10.5“)
Ref.-No. Description / Application lb