What does "EEEE" mean on Milltronics HydroRanger Plus?
If the Milltronics Measuring Instruments displays "EEEE", it means the reading is too high. Select larger Units (P005) or lower the Convert Reading (P061) to correct this.
What to do if Milltronics Measuring Instruments has no response to programmer?
If there is no response to the programmer with the Milltronics Measuring Instruments, the infrared interface may be obstructed, or the programmer may be defective. Clean the enclosure "docking bay" and the programmer magnet slot.
General| Brand | Milltronics |
|---|---|
| Model | HydroRanger Plus |
| Category | Measuring Instruments |
| Language | English |
Provides information specific to the Milltronics HydroRanger Plus level monitor and general start-up information.
Details the features and applications of the HydroRanger Plus level monitor, including its multi-purpose capabilities.
Lists the fixed features of the HydroRanger Plus, such as enclosure, LCD, programmer compatibility, and reliability.
Lists features that can be programmed by the operator to meet specific measurement requirements.
Guidelines for selecting an appropriate mounting location and physical dimensions for the HYDRO+ enclosure.
Details voltage selection and step-by-step installation procedures for the wall mount version.
Describes voltage selection and installation steps for the rack mount version into a sub-rack.
Covers voltage selection and installation procedures for the panel mount version.
Covers entering program mode, keypad functions, value alteration, and security.
Details RUN mode entry, display indicators, keypad functions, and performance evaluation.
Defines minimum programming for any application and lists specific application examples.
Details configurations for Wet Well, Reservoir, Rake, Penstock, Alarms, OCM, Volume, and Pumped Total.
Explains general failsafe operation and provides a Wet Well failsafe example.
Guidance on applying HYDRO+ to processes and contacting support.
Covers security, quick start, volume, reading, failsafe, and relay setup parameters.
Details relay, pump control, mA output, and mA input parameters.
Covers OCM, flow calculation, volume calculation, and totalizer parameters.
Details rate, measurement verification, scanning, echo processing, and adjustment parameters.
Covers test parameters, measurement verification, and master reset function.
Explains transmit pulse, echo processing techniques, and scope displays.
Details how distance and sound velocity are calculated.
Explains universal volume and flow calculation methods.
Summary table of standard relay set up configurations for various applications.
Information on replacing the clock module and general maintenance advice.
Lists common symptoms, causes, and actions for resolving issues.
Guidance on resolving LOE display, erratic readings, and fixed readings.
Detailed technical specifications including power, range, accuracy, and enclosure.
A chart for recording altered parameter values for various point numbers.
To Next Page
