Other Useful Functions
1
1
3
Useful Function
5
6
3-69
13
Press the key.
14
Press the jog key or to select [Auth.] .
15
Press the key.
16
Press the jog key or to set [Auth.] .
• Set the authentication method of the SMTP server.
• When you select [OFF], proceed to the Step 32.
17
Press the key.
18
Press the jog key or to select [Sender
Adr].
19
Press the key.
• Press and set the e-mail address to be
used as the sender mail address.
• Set it with alphanumeric characters and symbols within 64 characters.
20
Press the key.
21
Press the jog key or to select [User Name].
22
Press the key.
• Press to set the user name to use for the
authentication.
• Set it with alphanumeric characters and symbols within 30 characters.
23
Press the key.
• Depending on your server, if you do not set the e-mail address not supporting the account, sending/
receiving e-mails may be unavailable.
To Next Page
Loading...
