3-70
24
Press the jog key or to select [Pass Word] .
25
Press the key.
• Press to set the password to use for the
authentication.
• Set it with alphanumeric characters and symbols within 15 characters.
26
Press the key.
• When you select [POP before SMTP] in the Step 16, set the items
in the Step 27 to 31.
27
Press the jog key or to select [POP3 Addr.] .
28
Press the key.
• Press the jog key to set POP server.
• Set the server name or the IP address.
29
Press the key.
30
Press the jog key or to select [APOP] .
31
Press the key.
• Press to set ON/ OFF of APOP.
32
Press the key.
33
Press the key several times for terminating this function.
• On the password setting screen, the value currently set is not displayed. Only you can do is to enter
the value newly.
To Next Page
Loading...
