Chapter 1 Before Using This Product
40
4
Remove the remaining claw while pushing down on the lid.
5
Remove the old ink pack.
6
Place a new ink pack inside the 600 ml ink cartridge case.
• Push the ink pack connector into the 600 ml ink cartridge case slot with the double-sided tape
attached side facing down. Ink may not be supplied if the connector is out of position.
7
Adjust the shape of the ink pack.
8
Remove the seal of the double-sided tape.
9
Secure the ink pack so that it will not become loose.
The corners of the ink
pack and the case are not
aligned
The ink pack is inclinedThe ink pack is aligned with the
corner of the case
Good example Bad example
To Next Page
Loading...
