Chapter 1 Before Using This Product
41
10
Attach the lid.
• Engage the claw on the ink IC chip side, and fit the lid in the case.
• Be careful to avoid catching your hands or fingers.
11
Attach a new ink IC chip.
Good example Bad example
Gap Inserted incorrectly
left-to-right
Front and back are
reversed
No gap
12
Shake the Ink cartridge to the left and right slowly at least 20 times.
• Shake the case slowly from left to right to ensure that the ink moves inside.
• If the ink cartridge is partially used, flip the ink cartridge upright and shake slowly at an
angle, holding the ink cartridge slot with a paper towel.
Needle slot Gap on the side
• Ink IC chips
The marking on the ink IC chip indicates the color information.
★
Ink Color
☆
Marking
Cyan
(One blue circle)
1
To Next Page
Loading...
