MIMAKI JV300-130 - Check Pattern

© 2014 MIMAKI ENGINEERING CO.,LTD. 5.1.1 P.1
1
2
3
4
5
6
7
8
MAINTENANCE MANUAL > Test Items > Test Function > CHECK PATTERN
Model JV300-130/160 Issued 2014.05.30 Revised F/W ver 1.00 Remark
1.0
Rev.
R.1.0
5.1.1 CHECK PATTERN
 Outline
Following 9 “CHECK PATTERN” types are printable.
 List of CHECK PATTERN
100% 50% 25% 6.25%
NOZZLE V-LIN E H-LINE SLANT
GRADATE
No Operation Selectable Values / Description
1 Select a pattern Select a desired one among the check patterns listed above.
2 Select X resolution
180 ～ 1440 dpi
3 Select Y resolution
180 ～ 1440 dpi
4 Select scan direction and the
number of divisions.
Direction : SiDir ,BiDir
Divisions : 4,8,16,32,64 passes,6,12,24,48 passes
5 Select the Linewidth 1~1500dots
6 Select the interval of the line. 1~9999dots
7 Select drawing size X: 10 ~ 99990 mm
Y: 10mm ~ Paper detect size
8 Select drawing color MCYK(4 color), (4color+W)
MLmCMLcCKY(6color), (6color+W)
9 Start drawing. [ENTER]: Starts drawing.
[REMOTE]: Selects nozzles and Switches between high speed scanning ON and OFF.
10 During drawing. [END]: Stop the drawing.