MIMAKI JV300-130 - Pump Motor

© 2014 MIMAKI ENGINEERING CO.,LTD. 6.2.5 P.1
1
2
3
4
5
6
7
8
6.2.5 Pump Motor
 Work procedures
1. Remove the Under cover R, Cover R and Cover R2.
2. Remove the Selective path Assy. (Refer to 6.2.5)
3. Remove the Pump Assy. (Refer to 6.2.5)
Turn the main power OFF when turning the power OFF. It is very dangerous if sleep mode functions
mistakenly during the operation.
Be sure to wear protective glasses and working gloves during the operation.
Ink may get into your eyes depending on the working condition, or hand skin may get rough if you touch
the ink.
Pump Motor
x2
Take care not to pollute the surroundings with waste
ink or washing liquid.
R.1.0
MAINTENANCE MANUAL > Disassembly and Reassembly > Ink-related Parts > Pump Motor
Model JV300-130/160 Issued 2014.05.30 Revised F/W ver 1.00 Remark
1.0
Rev.