MIMAKI JV300-130 - Positioning of the Wiper Drive Link

© 2014 MIMAKI ENGINEERING CO.,LTD.
4.3.8 P.1
1
2
3
4
5
6
7
8
R.1.0
4.3.8 Positioning of the Wiper Drive Link
 Outline
Adjust the position of the wiper drive link.
 Procedure
1. After setting the clearance between the motor base and the wiper
drive link at 0.5 mm, check whether the wiper moves smoothly.
Wiper Drive Link
0.5 mm
MAINTENANCE MANUAL > Adjustment Items > Mechanical Adjustment > Positioning of the Wiper Drive Link
Model JV300-130/160 Issued 2014.05.30 Revised F/W ver. 1.00 Remark
1.0
Rev.