MIMAKI JV300-130 - Replacement of the Wiper Cleaner Assy.

© 2014 MIMAKI ENGINEERING CO.,LTD. 3.1.4 P.1
1
2
3
4
5
6
7
8
R.1.0
MAINTENANCE MANUAL > Workflow > Ink Related Parts > Replacement of the Wiper Cleaner Assy.
Model JV300-130/160 Issued 2014.05.30 Revised F/W ver. 1.00 Remark
1.0
Rev.
3.1.4 Replacement of the Wiper Cleaner Assy.
 List of replacement procedures
Item Work operation Description Ref.
Covers
1.

Removal of covers, etc. Remove the Front cover L, M. 6.1.1
Wiper
Cleaner Assy.
2. 
Removal of the wiper cleaner
assy.
Remove the Wiper cleaner assy.
3. 
Mounting of the wiper cleaner
assy.
Mount the Wiper cleaner assy.
For replacement : SPA-0243 Wiper cleaner
Check
4. 
Cleaning operation Check whether each assembly and adjustment has been
carried out properly by wiper cleaning operation.
Covers
5.

Mounting of the covers. Mount the covers that have been removed. 6.1.1
Be sure to wear protective glasses and working gloves during the operation.
Ink may get into your eyes depending on the working condition, or hand skin may get rough if you touch
the ink.
Turn the main power OFF when turning the power OFF. It is very dangerous if sleep mode functions
mistakenly during the operation.
Wiper cleaner Assy.
Wiper unit