MIMAKI JV300-130 - Clamp Assy.

© 2014 MIMAKI ENGINEERING CO.,LTD. 6.2.12 P.1
1
2
3
4
5
6
7
8
6.2.12 Clamp Assy.
 Work procedures
1. Turn off the main power supply of the machine.
2. Remove the Y cover 160.
3. Remove the Clamp hold plate A (2 range, screw x2) or Clamp
hold plate (3 range, screw x3).
4. Remove the Clamp Assy.
5. Reverse the disassembly procedure for reassembly.
Turn the main power OFF when turning the power OFF. It is very dangerous if sleep mode functions
mistakenly during the operation.
Clamp Assy. x20
Pinch roller
For replacement : SPA-0247 PR10
Clamp hold plate
Clamp Assy.
R.1.0
MAINTENANCE MANUAL > Disassembly and Reassembly > Ink-related Parts > Clamp Assy.
Model JV300-130/160 Issued 2014.05.30 Revised F/W ver 1.00 Remark
1.0
Rev.