MIMAKI JV300-130 - Maint. Wash

© 2014 MIMAKI ENGINEERING CO.,LTD.
4.2.9 P.1
1
2
3
4
5
6
7
8
MAINTENANCE MANUAL > Adjustment Items > Adjustment Function > MAINT. WASH
Model JV300-130/160 Issued 2014.05.30 Revised F/W ver. 1.00 Remark
1.0
Rev.
R.1.0
4.2.9 MAINT. WASH
 Outline
Fill up washing liquid for the sequence to apply it at station maintenance.
 Procedure
1. When you perform filling, insert the washing liquid cartridge
into the washing liquid slot.
2. When you discharge, remove it.
3. Select [#ADJUST][MAINT. WASH] from the operation menu.
4. Press the [ENTER] key, and then the valve is released and the
pump rotates.
5. Perform cleaning operation and terminate with [END] key.
FUNCTION
#ADJUST [ENT]
#ADJUST
MAINT. WASH [ENT]
CART:ON END:OFF
EXECUTE [ENT]
PLEASE WAIT
** CLEANING **
PLEASE WAIT