MIMAKI JV300-130 - Pointer Offset

© 2014 MIMAKI ENGINEERING CO.,LTD.
4.2.15 P.1
1
2
3
4
5
6
7
8
MAINTENANCE MANUAL > Adjustment Items > Adjustment Function > POINTER OFFSET
Model JV300-130/160 Issued 2014.05.30 Revised F/W ver. 1.00 Remark
1.0
Rev.
R.1.0
4.2.15 POINTER OFFSET
 Function
Print the adjustment pattern and adjust the location of the LED pointer and print origin (Nozzle A Column).
 Procedure
1. Select [#ADJUST] - [POINTER OFFSET].
2. Make necessary adjustments.
[ENTER]: Starts drawing.
After drawing is completed
[], [], [], [] : LED pointer movement
Align the LED pointer to the pattern position
shown on the left (intersection of the straight
lines).
[ENTER]: Settings
[END]: Cancellation of input
FUNCTION
#ADJUST [ENT]
#ADJUST
POINTER OFFSET [ENT]
LED Pointer
This function perform adjusting only once.
When drawing is performed, readjustment is
necessary because adjustment value is reset.