MIMAKI JV300-130 - Replacement of the X-Axis Motor

© 2014 MIMAKI ENGINEERING CO.,LTD. 3.2.1 P.1
1
2
3
4
5
6
7
8
R.1.0
MAINTENANCE MANUAL > Workflow > Driving Parts > Replacement of the X-axis Motor
Model JV300-130/160 Issued 2014.05.30 Revised F/W ver. 1.00 Remark
1.0
Rev.
3.2.1 Replacement of the X-axis Motor
 List of replacement procedures
Item Work operation Description Ref.
Covers
1.

Removal of covers, etc. Remove the Cover L. 6.1.1
X-axis Motor
2. 
Removal of the X-axis motor. Remove the X-axis motor. 6.3.1
3.

Mounting of the X-axis motor. Mount the X-axis motor.
Covers
4. 
Mounting of the covers. Mount the covers that have been removed. 6.1.1
Turn the main power OFF when turning the power OFF. It is very dangerous if sleep mode functions
mistakenly during the operation.
X-axis Moter