MIMAKI JV300-130 - Y-Axis Motor

© 2014 MIMAKI ENGINEERING CO.,LTD. 6.3.2 P.1
1
2
3
4
5
6
7
8
6.3.2 Y-axis Motor
 Work procedures
1. Remove the Cover R.
2. Manually move the print head carriage on the platen and
remove the Y-pulley cover (screw x2).
Turn the main power OFF when turning the power OFF. It is very dangerous if sleep mode functions
mistakenly during the operation.
Y-axis Motor
Y-pulley cover
R.1.0
MAINTENANCE MANUAL > Disassembly and Reassembly > Drive System > Y-axis Motor
Model JV300-130/160 Issued 2014.05.30 Revised F/W ver 1.00 Remark
1.0
Rev.