MIMAKI JV300-130 - Circulation Pump

© 2014 MIMAKI ENGINEERING CO.,LTD. 6.2.6 P.1
1
2
3
4
5
6
7
8
6.2.6 Circulation Pump
 Outline
Circulation filter is used for white ink.
 Work procedures
1. Remove the Cartridge rear cover.
2. Remove the tubes (x4).
Turn the main power OFF when turning the power OFF. It is very dangerous if sleep mode functions
mistakenly during the operation.
Be sure to wear protective glasses and working gloves during the operation.
Ink may get into your eyes depending on the working condition, or hand skin may get rough if you touch
the ink.
Circulation pump
Fitting x4
Take care not to pollute the surroundings with waste
ink or washing liquid.
R.1.0
MAINTENANCE MANUAL > Disassembly and Reassembly > Ink-related Parts > Circulation Pump
Model JV300-130/160 Issued 2014.05.30 Revised F/W ver 1.00 Remark
1.0
Rev.