MIMAKI JV300-130 - Page 143

© 2014 MIMAKI ENGINEERING CO.,LTD. 6.2.5 P.2
6.2.5 Pump Motor
1
2
3
4
5
6
7
8
4. Remove the Pump motor Assy connector.
5. Remove the two screws and remove the Pump motor Assy.
6. Remove the Stepping motor.
7. Reverse the disassembly procedure for reassembly.
Connector
Screws
Pump motor
Screw
Do not install the ink tube in the wrong position.
R.1.0
MAINTENANCE MANUAL > Disassembly and Reassembly > Ink-related Parts > Pump Motor
Model JV300-130/160 Issued 2014.05.30 Revised F/W ver 1.00 Remark
1.0
Rev.