MIMAKI JV300-130 - SL2 H PCB Assy.

© 2014 MIMAKI ENGINEERING CO.,LTD.
2.3.2 P.1
1
2
3
4
5
6
7
8
R.1.0
2.3.2 SL2H PCB Assy.
 Outline
Board name: SL2H PCB Assy.(E107938)
Located on the top of the print part slider.
Controlling the Head and IO of the carriage.
 List of connectors
No Pin Type Intended use AC/DC Remarks
CN1 14 B14B-PHDSS Slider IF DC
CN2 9 B9B-ZR For debug DC
CN3 30 620B-100-136-001+ COM WF1 DC
CN4 30 620B-100-136-001+ COM WF2 DC
CN5 30 620B-100-136-001+ GND DC
CN6 30 620B-100-136-001+ COM WF3 DC
CN7 30 620B-100-136-001+ COM WF4 DC
CN8 30 620B-100-136-001+ Slider IF DC
CN9 10 B10B-PHDSS AUX. DC Not used
CN10 12 B12B-PHDSS Paper width sensor, LED pointer, Linear
encoder input
DC
CN11 16 B16B-PHDSS HEAD height sensor, JAM sensor, Cutter DC
CN12 8 B8B-PHDSS AUX. DC Not used
CN13 12 B12B-ZR HEAD memory PCB DC
CN14 29 29FMN-BTL-A HEAD1(RearCN3) DC
CN15 29 29FMN-BTL-A HEAD2(RearCN3) DC
CN16 29 29FMN-BTL-A HEAD1(RearCN4) DC
CN17 29 29FMN-BTL-A HEAD2(RearCN4) DC
CN18 29 29FMN-BTL-A HEAD1(FrontCN4) DC
D1〜D4
D29,30
D5
F1
F2
MAINTENANCE MANUAL > Electrical Parts > Circuit Board Specifications > SL2H PCB Assy.
Model JV300-130/160 Issued 2014.05.30 Revised F/W ver. 1.00 Remark
.
1.0
Rev.