EasyManua.ls Logo

MIMAKI JV300-130 - Cartridge LED Control; Condition of each Cartridge LED Indicated by Its Lighting and Blinking; LED Operation Pattern

MIMAKI JV300-130
244 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
© 2014 MIMAKI ENGINEERING CO.,LTD.
1.3.4 P.1
1
2
3
4
5
6
7
8
R.1.0
1.3.4 Cartridge LED Control
Condition of each cartridge LED indicated by its lighting and blinking
The LED light up or blink to indicate the condition of the cartridge and help the user determine the time for replacing
the cartridge.
*1 Ink IC: NON-ORIGINAL INK, WRONG INK IC, Kind of INK, Color of INK, WRONG CARTRIDGE,
Expiration:2MONTH
LED operation pattern
LED color Cartridge status
Blue Not lit No cartridge has been selected as the supply cartridge
Blinking
Lit A cartridge has been selected as the supply cartridge
(All cartridge LEDs are Lit for any other than the 4-color ink set except when an error occurs.)
Ink use-up cleaning is now being performed
For details, see "1.3.7 Use-up Cleaning".
Red Not lit The cartridge is normal
Blinking An error has occurred (Blinking signifies that one of the following errors has occurred)
Cartridge near end
Cartridge ink end
One month has passed since the expiration date of the ink
Lit An error has occurred (Lighting signifies that one of the following errors has occurred)
Residual quantity 0 cartridge
No cartridge
Ink IC*1
Event
For the 4-color ink set
M and Bl ink for the 6-color ink set
Except for left case
Cartridge 1 Cartridge 2 Cartridge 1
LED condition LED condition LED condition
Online supply start
Both cartridges free from problems
Cartridge 1 is the control cartridge.
Blue light Blue Lit
Cartridge 1
Cartridge near end
Blue and Orange
alternately light
Blue and Orange
alternately light
Cartridge 1
Cartridge ink end
Cartridge 2 is the control cartridge.
Orange light Blue light Orange Lit
Cartridge 2
Cartridge near end
Orange light
Blue and Orange
alternately light
Cartridge 1
Removed for replacement
Red light
Blue and Orange
alternately light
Red Lit
Cartridge 1
A normal cartridge has been set
Blue and Orange
alternately light
Blue Lit
Cartridge 2
Cartridge ink end
Cartridge 1 is the control cartridge.
Blue light Orange Lit
Online printing has been completed
All valves closed
Blue light Orange Lit Blue Lit
MAINTENANCE MANUAL > Operating Principle > Ink System > Cartridge LED Control
Model
JV300-130/160
Issued
2014.05.30
Revised F/W ver.
1.10
Remark
1.0
Rev.

Table of Contents

Other manuals for MIMAKI JV300-130

Related product manuals