MIMAKI JV300-130 - CP Absorber

© 2014 MIMAKI ENGINEERING CO.,LTD. 6.2.9 P.1
1
2
3
4
5
6
7
8
6.2.9 CP Absorber
 Work procedures
1. Turn off the main power supply of the machine.
2. Manually move the head unit over the platen.
3. Remove the Cap slider cover and the CP absorber by pushing
the stopper.
4. Remove the CP absorber.
5. Reverse the disassembly procedure for reassembly.
Turn the main power OFF when turning the power OFF. It is very dangerous if sleep mode functions
mistakenly during the operation.
CP absorber x3
Cap slider
cover
Push stopper
CP absorber
Take care not to pollute the surroundings with waste
ink or washing liquid.
R.1.0
MAINTENANCE MANUAL > Disassembly and Reassembly > Ink-related Parts > CP Absorber
Model JV300-130/160 Issued 2014.05.30 Revised F/W ver 1.00 Remark
1.0
Rev.