MIMAKI JV300-130 - Circulation Filter

© 2014 MIMAKI ENGINEERING CO.,LTD. 6.2.7 P.1
1
2
3
4
5
6
7
8
6.2.7 Circulation Filter
 Outline
Circulation filter is used for white ink.
 Work procedures
1. Remove the Cartridge rear cover.
2. Remove the tubes with fittings (x4).
Turn the main power OFF when turning the power OFF. It is very dangerous if sleep mode functions
mistakenly during the operation.
Be sure to wear protective glasses and working gloves during the operation.
Ink may get into your eyes depending on the working condition, or hand skin may get rough if you touch
the ink.
Circulation Filter x2
Fitting
x4 positions
Take care not to pollute the surroundings with ink or
washing liquid.
R.1.0
MAINTENANCE MANUAL > Disassembly and Reassembly > Ink-related Parts > Circulation Filter
Model JV300-130/160 Issued 2014.05.30 Revised F/W ver 1.00 Remark
1.0
Rev.