MIMAKI JV300-130 - Page 152

© 2014 MIMAKI ENGINEERING CO.,LTD. 6.2.10 P.2
6.2.10 Valve Assy
1
2
3
4
5
6
7
8
6. Remove the tube with joint.
7. Reverse the disassembly procedure for reassembly.
Joint
Tube
Take care not to contaminate the surroundings with
ink. Also, take care not to lose the O-ring.
Do not install the ink tube in the wrong position.
R.1.0
MAINTENANCE MANUAL > Disassembly and Reassembly > Ink-related Parts > Valve Assy
Model JV300-130/160 Issued 2014.05.30 Revised F/W ver 1.00 Remark
1.0
Rev.