MIMAKI JV300-130 - Page 182

© 2014 MIMAKI ENGINEERING CO.,LTD. 6.4.5 P.1
1
2
3
4
5
6
7
8
6.4.5 Mini Memory PCB Assy
 Work procedures
1. Remove the following covers.
• Front Cover M, L
• Carriage cover
2. Move the head unit on the platen.
3. Remove Mini memory PCB Assy. from the connector.
4. Reverse the disassembly procedure for reassembly.
Turn the main power OFF when turning the power OFF. It is very dangerous if sleep mode functions
mistakenly during the operation.
Mini memory PCB Assy x2
Mini memory PCB Assy
R.1.0
MAINTENANCE MANUAL > Disassembly and Reassembly > Electrical Parts > Mini Memory PCB Assy
Model JV300-130/160 Issued 2014.05.30 Revised F/W ver 1.00 Remark
1.0
Rev.