MIMAKI JV300-130 - Page 67

© 2014 MIMAKI ENGINEERING CO.,LTD.
4.2.2 P.3
4.2.2 STAGGER ADJUST
1
2
3
4
5
6
7
8
4. Loosen the screws (x3) for fixing.
5. Referring to the Step 3, move the adjusting lever to adjust the
stagger of the head.
6. Fix the screws (x3)
7. Repeat the procedures in the Step 2 to 6 until you can adjust.
8. Move the adjusting lever to the left edge.
For fix (1)
For fix (1)
For fix (1)
Fix the screws after adjustment in the order of (1), (2)
and (3).
R.1.0
MAINTENANCE MANUAL > Adjustment Items > Adjustment Function > STAGGER ADJUST
Model JV300-130/160 Issued 2014.05.30 Revised F/W ver. 1.00 Remark
1.0
Rev.