Chapter6 Appendix
6-2
Specifications
Machine specifications
Item TS55-1800
Print head
Method Drop-on-demand piezoelectric print heads
Specification 4-Head
Printing mode (scan x feed)
360×360dpi/ 480×600dpi/540×360dpi/ 600×600dpi/720x600
*1
/720×720dpi/
720×1080dpi
Usable inks 9 colors (Y, M, Bl, K, LBl, Lm, Lk, FP, FY)
Ink supply
Supplying from ink packs through tubes.
Ink pack replacement type:
Supplying by Toggle switch over with 2 packs/color
(4-colors/6-colors ink set: M, Bl 7colors ink set: M)
Capacity of ink
pack
4-colors Y, M, Bl, K: 2L-ink pack x 2 for each color
6-colors
Y, K, LBl, Lm: 2L-ink pack x 1 for each color
M, Bl: 2L-ink pack x 2 for each color
7-colors
Y, K, Bl, LBl, Lm, Lk: 2L-ink pack x 1 for each color
M: 2L-ink pack x 2
8-colors Y, M, Bl, K, LBl, Lm, FP, FY: 2L-ink pack x 1 for each color
Usable media Duplex paper
Max. printing width 1,940 mm (76.4 in)
Roll Media size
Maximum 1,950 mm (76.8 in)
Minimum 210 mm (8.3 in)
Thickness 1.0 mm or less (0.04 in or less)
Roll outside
diameter
*2
Paper media: Φ250 mm or less (Φ9.8 in or less)
Roll weight
*2, *3
45 kg or less (88.2 lb or less)
Roll inside diameter 2 or 3 inches
Printing surface Side facing outward
Roll end treatment
The roll end is gently fixed to the core with weak-adhesive tape or weak glue for
easy removal.
Margin Roll media
Left end and right end: 15 mm (Default) Front: 120 mm Rear: 150 mm
(Left end and right end: 0.6 in (Default) Front: 4.7 mm Rear: 5.9 mm)
Distance accu-
racy
Absolute accuracy
Whichever the larger one of ± 0.3 mm or ± 0.3% of the designated
(Whichever the larger one of ± 0.01 in or ± 0.3% of the designated)
Reproducibility
Whichever the larger one of ± 0.2 mm or ± 0.1% of the designated
(Whichever the larger one of ± 0.008 in or ± 0.1% of the designated)
Perpendicularity ± 0.5 mm / 1,000 mm (± 0.02 in / 39.4 in)
Media skew 5 mm or less / 10 m (0.2 in or less / 32.8 ft)
Head height adjustment
Low (2.8mm) / Mid (3.3mm) / High (3.8mm)
(Low (0.11 in) / Mid (0.13 in) / High (0.15 in))
Cutting of media
Cutting of Y direction by the head cutter.
Cutting accuracy (steps): 0.5 mm or less (0.02 in or less)
Media delivery
Take-up device supplied as a standard accessory
(switching possible between face in and face out).
Waste ink tank Bottle type: 2,000 cc (2 liters)
Interface
Print data transmis-
sion function
USB 2.0 Hi-speed, Ethernet 1000BASE-T
Mail function Ethernet 10 BASE-T / 100 BASE-TX / 1000BASE-T
Command MRL- V
Noise
during standby Less than 58 dB (A) (FAST-A, Front & Rear & Left & Right 1 m (39.4 in))
during continuous
printing
Less than 65 dB (A)
during discontinu-
ous printing
Less than 70 dB (A)
To Next Page
Loading...
