MIMAKI TS55-1800 - Chapter 4 Maintenance (Continuing); Replacing the Cap

4-18
Chapter 4 Maintenance
5
Open the front cover.
6
Remove the fitting.
• Pull out the fitting by holding the protrusions at
both ends.
7
Remove the wiper cleaner.
• Pull it to the front to remove it.
8
Insert a new wiper cleaner.
• Slide it all the way in to install it.
9
Attach the fitting.
10
When replacement is complete, press the
key.
11
Close the front cover, and press the
key.
• After its initial operation, the machine returns to
step 1.
Replacing the Cap
The cap (PN:SPC-0842) is a consumable item. If the cap
becomes dirty or gets scratches, or nozzle drop outs do
not change even after cleaning (suction failure), replace
with the new cap.
1
Press
(MENU)
in LOCAL.
2
Press to select
"MAINTENANCE", and press the
key.
• The MAINTENANCE menu is displayed.
3
Press to select "STATION
MAINT.", and press the key.
4
Press to select "CARRIAGE
OUT", and press the key.
• The carriage moves over the platen.
5
Open the front cover.
Carriage
• The Cap is an optional item. You can buy one
through your local dealer or from our service
office.
Carriage