MIMAKI TS55-1800 - Chapter 4 Maintenance (Continuing); MAINTENANCE MENU Overview

Chapter 4 Maintenance
4-4
About MAINTENANCE MENU
This provides various settings for performing maintenance.
The following items can be set in MAINTENANCE settings.
TEST PRINT
>
> CLEANING
>
STATION
OFF
Vacuum Cont. Running
MAINTENANCE
STATION
>
> NOZZLE RECOVERY
>
AUTO MAINTENANCE
>
INK FILLING
INK TANK EXCHANGE
>
MENU
SETUP
>
> MAINTENANCE
>
MACHINE SETUP
>
NOZZLE CHECK
>
INFORMATION
MAINTENANCE
STATION
>
> NOZZLE RECOVERY
>
AUTO MAINTENANCE
>
FILL UP INK
REPLACE WasteInkTank
TEST PRINT
>
> CLEANING
>
STATION
MAINTENANCE
STATION
>
> NOZZLE RECOVERY
>
AUTO MAINTENANCE
>
FILL UP INK
REPLACE WasteInkTank
TEST PRINT
>
> CLEANING
>
STATION
MAINTENANCE
STATION
>
> NOZZLE RECOVERY
>
AUTO MAINTENANCE
>
FILL UP INK
REPLACE WasteInkTank
MAINTENANCE
STATION
>
> NOZZLE RECOVERY
>
AUTO MAINTENANCE
>
FILL UP INK
REPLACE WasteInkTank
MAINTENANCE
STATION
>
> NOZZLE RECOVERY
>
AUTO MAINTENANCE
>
FILL UP INK
REPLACE WasteInkTank
REMOTEMENU
TEST PRINT
CLEANING
REMOTEMENU
TEST PRINT
CLEANING
Local <Setup 1>
REMOTEMENU
TEST PRINT
CLEANING
REMOTEMENU
TEST PRINT
CLEANING
Local <Setup 1>
REMOTEMENU
TEST PRINT
CLEANING
REMOTEMENU
TEST PRINT
CLEANING
Local <Setup 1> MAINTENANCE MAINTENANCE MAINTENANCE
TEST PRINT
>
> CLEANING
>
STATION
MAINTENANCE
POST1 POST2
30°/40° 30°/50°
LOW 1620mm
POST1 POST2
30°/40° 30°/50°
LOW 1620mm
POST1 POST2
30°/40° 30°/50°
LOW 1620mm
OFF
Vacuum Cont. Running
OFF
Vacuum Cont. Running
OFF
Vacuum Cont. Running
 MAINTENANCE MENUs at-a-glance
 Screen transition when key is pressed
: Press this to select MACHINE SETUP MENU, or to switch
to the previous screen.
: Press this to use the maintenance function.
: Press this to switch to the next screen.
: Use these to select a setting item.
: Press this to confirm a setting, etc..