MIMAKI TS55-1800 - Chapter 4 Maintenance (Continuing); Nozzle Recovery Function

4-13
1
2
2
4
5
6
Chapter 4 Maintenance
7
Use a clean stick to wipe ink off the head
surface.
• Never rub the nozzles.
8
Press the key after cleaning.
9
Close the maintenance cover, and press
the key.
• After its initial operation, the machine returns to
LOCAL.
Nozzle Recovery Func-
tion
When missing nozzles cannot be improved at specific
points, other good nozzles can be used as alternatives for
printing.
1
Check the nozzle status with the test print.
• Test Printing( P.2-10)
• Correspondence of head / nozzle row is as
follows. There are eight rows of nozzles in one
head, indicated by A to H.
2
Press
(MENU)
in LOCAL.
3
Press to select
"MAINTENANCE", and press the
key.
• The MAINTENANCE menu is displayed.
4
Press to select "NOZZLE
RECOVERY" and press the key.
5
Press to select "PRINT", and
press the key.
6
Press to select "HEAD1" or
"HEAD2"and press the key.
7
Press to select "PRINT START",
and press the key.
• All patterns from nozzle row A to H in the selected
head are printed.
Clean the side surface of the head
(shown in dark gray) with a clean stick.
The nozzle part
(Do not touch.)
Clean with a clean stick.
H1-A
H1-B
H1-C H1-D H1-E H1-F H1-G H1-H
H2-A
H2-B
H2-C H2-D H2-E H2-F H2-G H2-H