MIMAKI TS55-1800 - Chapter 3 Setup (Continuing); Printing Check and Nozzle Recovery Settings

3-25
1
2
3
4
5
6
Chapter 3 Setup
Setting the Printing Check
Select ON when you want to conduct nozzle check at the
start of online printing.
1
Press
(MENU) (3 times)
in LOCAL.
• NOZZLE CHECK MENU will be displayed.
2
Press the key.
• "Printing Check" will be selected.
3
Press to select ON, and press
the key.
• The "Check Interval" setting screen will be
displayed.
• "Select OFF to not set nozzle check. Proceed to
Step 11.
4
Press the key.
5
Press to select setting item, and
press the key.
• select the nozzle check interval from "LENGTH"
or "FILE".
LENGTH: nozzle check is conducted when the
printed length reaches the set length.
If the set distance is reached during
printing, the nozzle check will be
performed at the start of the next
printing.
FILE: nozzle check is conducted when the
number of printed files reaches the
set number.
6
Press to select setting value,
and press the key.
• The set value will differ according to the setting
selected in Step 5.
LENGTH: 0.1 to 100.0 m
FILE: 1 to 100 files
7
Press the key twice.
• The "Action" setting screen will be displayed.
8
Press the key.
• "CLEANING TYPE" will be selected.
9
Press to select cleaning type,
and press the key.
Setting value: OFF/SOFT/ NORMAL/ HARD
10
Press to select retry count, and
press .
Setting value: 0 to 3
11
Press the key several times to
end the setting.
Setting the NOZZLE RECOVERY
set this if you want to conduct automatic nozzle recovery
when nozzle missing is detected.
1
Press
(MENU) (3 times)
in LOCAL.
• NOZZLE CHECK MENU will be displayed.
2
Press , and press the key.
• "NOZZLE RECOVERY" will be selected.
3
Press to select ON/OFF, and
press .
4
Press the key several times to
end the setting.
Setting the Judgment Condition
Set the conditions for judging nozzle missing.
1
Press
(MENU) (3 times)
in LOCAL.
• NOZZLE CHECK MENU will be displayed.
2
Press twice, and press the
key.
• "Judgment Condition" will be selected.
3
Press to select color, and press
the key.
4
Press to set the number of
nozzles for judgment, and press the
key.
5
Press the key several times to
end the setting.
• The type of color changes depending on
the ink set.