MIMAKI TS55-1800 - Chapter 3 Setup (Continuing); Displaying Machine Information and Status

3-27
1
2
3
4
5
6
Chapter 3 Setup
Displaying the Information
1
Press
(MENU) (4 times)
in LOCAL.
• INFORMATION MENU will be displayed.
2
Press to select a information.
• Refer to the "INFORMATION MENU", and select
the information to be displayed.
3
Press the key.
• If you selected [LIST] in step 2, the machine’s
settings will be printed.
4
Press the key several times to
end the setting.
Display maintenance status (local
guidance)
1
Press the key in local mode.
• Maintenance status is displayed.
• When you reset the used count of the
wiper, press [FUNC2] key while
[RESET?] is displayed. When you press
the [ENTER] key, the number of wipings
is reset.
• By pressing the function key during
display of "WIPING information,"
"WASTE TANK information" and "Spout
Rubber" in USAGE, the used counts
can be reset.
When resetting WIPING information:
Press [FUNC2]
When resetting WASTE TANK
information:Press [FUNC1]
To reset the spout rubber:
Press [FUNC3]
MaintenanceCondition
Condition
Good
Days AgoStation/Head
OK
WashLiquid
WiperLife
OK
MaintenanceCondition
Condition
Normal
4 Days AgoStation/Head
OK
WashLiquid
WiperLife
OK
MaintenanceCondition
Condition
Bad
10 DaysAgoStation/Head
NG
WashLiquid
WiperLife
NG