MIMAKI TS55-1800 - Chapter 3 Setup (Continuing); MACHINE SETUP MENU Function Table

Chapter 3 Setup
3-12
MACHINE SETUP MENU table
Function name Set value Meaning
AUTO Power-off ( P.3-14)
NONE/
10 ~ 30
~ 600min
When no operation has been performed for the
set time, the power supply is automatically
turned "OFF".
TAKE-UP UNIT
(P.3-14)
Sub take-up unit ON
/ OFF Set whether or not to use sub take-up unit.
Sub take-up SW ON/ OFF
Sets the operation method when pressing the
ON / OFF button of the sub take-up unit.
Top blower
(P.3-14)
ON AUTO
/ STORONG/ WEAK
Set the operation of the top blower in print.
OFF
MEDIA REMAIN ( P.3-14) ON/ OFF
You can control the remaining amount of media.
Media Detect
(P.3-15)
At Startup ON/ OFF
Set whether or not to detect media at the
machine startup.
Detect Speed High
/ Normal Set the media detection speed.
LANGUAGE ( P.3-15)
日本語 /English
/ 中文 /Turkce
Displayed language is changed.
TIME SET ( P.3-15) +4h ~ -20h (
Japan time ) Time difference is corrected.
UNIT/ TEMP. ( P.3-16) °C
(Centigrade)/°F (Fahrenheit) A unit for displaying temperature is set.
UNIT/ LENGTH ( P.3-16) mm
/ inch A unit for displaying length and area is set.
KEY BUZZER ( P.3-16) ON
/ OFF A buzzer sound when keys are pressed is set.
VIEW FEED ( P.3-16) ON
/ OFF
Set whether media feeding is performed for
checking the result of the test printing etc. or not.
Space Btwn PP. ( P.3-16) ON
/ OFF
Set whether media feeding is performed for
checking the result of the test printing etc. or not.
SPACE FEED MODE ( P.3-16)
INTERMITTENT
/
CONTINUOUS
Change the feed mode of the margin included in
the image data.
NETWORK
(P.3-17)
Set the network.
Check IP Addr. The IP address currently used by this machine is displayed.
Check MAC Addr. The IP address currently used by this machine is displayed.
DHCP ON / OFF
When it is ON, the IP address given by the
DHCP server is used.
AutoIP ON / OFF
When it is ON, the IP address is determined by
the AutoIP protocol. However, DHCP is ON,
DHCP has priority.
IP Address
*1
Set the IP address used by this machine.
Default Gateway
*1
Set the default gateway used by this machine.
DNS Address
*1
Set the DNS server address used by this machine.
SubNet Mask
*1
Set the digit number of the subnet mask used by this machine.