MIMAKI TS55-1800 - Chapter 3 Setup (Continuing); Event Mail Function Configuration; Auto Remote, Lighting, and Initialization

Chapter 3 Setup
3-13
1
2
3
4
5
6
EVENT MAIL
Mail Delivery
(P.3-18)
ON / OFF
Set whether you send/ do not send the e-mail
when the set event occurs.
Select Event
(P.3-18)
Print Start
Event
ON / OFF
Set whether you send/ do not send the e-mail at
the start of printing.
Print End Event ON / OFF
Set whether you send/ do not send the e-mail at
the end of printing.
Plot Start Event ON / OFF
Set whether you send/ do not send the e-mail at
the start of plotting.
Plot End Event ON / OFF
Set whether you send/ do not send the e-mail at
the end of plotting
Error Event ON / OFF
Set whether you send/ do not send the e-mail
when a error occurs.
Warning Event ON / OFF
Set whether you send/ do not send the e-mail
when a warning occurs.
Other Event ON / OFF
Set whether you send/ do not send the e-mail
when an event other than the above occurs.
Mail Address
(P.3-18)
Set the e-mail address to which
you send the event mail.
Alphanumeric characters and symbols (within 96
characters)
Message Subject
(P.3-18)
Set the characters to write in the
subject of the event mail.
Alphanumeric characters and symbols (within 8
characters)
Server Setup
(P.3-19)
SMTP Address Set the SMTP server.
SMTP Port No. Set the SMTP port number.
SENDER ADDRESS
Set the e-mail address to be used as the sender
mail address.
Authentication
POP before
SMTP
Set the SMTP server authentication method
(SMTP authentication).
SMTP
Authentication
OFF
User Name
*2
Set the user name used for the authentication.
Pass Word *2 Set the password used for the authentication.
POP3 Address
*3
Set the POP server.
APOP *3 Set ON/OFF of APOP.
Transmit Test
(P.3-20)
Send the test e-mail.
Auto Remote (P.3-21)
ON
/ OFF
When data is received in the local mode, it
automatically switches to the remote mode and
sets whether to start printing.
Illumination
( P.3-21)
Lighting Up Type Auto
/ Manual
Set the lighting / extinguishing method for
printing operation and maintenance work (cover
open etc).
Lighting Up
Extention
None / 1~5
~10min
When "Auto" is selected, set the time to continue
lighting etc. after printing operation.
Start Up Lighting ON / OFF
Set whether to turn ON / OFF at the time of unit
startup.
Feeding before cut
(P.3-21) ON / OFF
You can disable the media feed operation at the
time of media cut execution.
RESE T
( P.3-21)
All setting values are returned to the status
default.
*1. Settable when both of DHCP and AutoIP are [OFF]
*2. Settable only when Auth. is not OFF
*3. Settable only when Auth. is POP before SMTP
Function name Set value Meaning