MIMAKI TS55-1800 - Chapter 3 Setup (Continuing); Event Mail Settings Configuration

Chapter 3 Setup
3-18
Enable the event mail function
1
Press
(MENU) (twice)
in LOCAL.
• MACHINE SETUP MENU will be displayed.
2
Press
(<<)
.
3
Press to select "EVENT MAIL",
and press the key.
4
Press the key.
• "MAIL DELIVERY" will be selected.
5
Press to select "ON", and press
the key.
6
Press the key several times to
end the setting.
Set the event to send an event mail
1
Press
(MENU) (twice)
in LOCAL.
• MACHINE SETUP MENU will be displayed.
2
Press
(<<)
.
3
Press to select "EVENT MAIL",
and press the key.
4
Press , and press the key.
• "SELECT EVENT" will be selected.
5
Press to select the event, and
press
(  )
.
• After selecting the event, press [FUNC2] key and
put a check in the check box.
An email will be sent when the event whose box
has been checked occurs.
• To select multiple events, use [][] to put the
cursor over the events you want, and put a check
in their boxes by pressing [FUNC2].
6
Press the key several times to
end the setting.
Set the e-mail address
1
Press
(MENU) (twice)
in LOCAL.
• MACHINE SETUP MENU will be displayed.
2
Press
(<<)
.
3
Press to select "EVENT MAIL",
and press the key.
4
Press twice, and press the
key.
• "MAIL ADDRESS" will be selected.
5
Press to set mail
address, and press the key.
• Set the e-mail address to which you send the
event mail.
• Set it with alphanumeric characters and symbols
within 96 characters.
6
Press the key several times to
end the setting.
Set the subject
1
Press
(MENU) (twice)
in LOCAL.
• MACHINE SETUP MENU will be displayed.
2
Press
(<<)
.
3
Press to select "EVENT MAIL",
and press the key.
4
Press 3 times, and press the
key.
• "MASSAGE SUBJECT" will be selected.
5
Press to set subject,
and press the key.
• Set the characters to write in the subject of the
event mail.
• Set it with alphanumeric characters and symbols
within 8 characters.
6
Press the key several times to
end the setting.
Event name Outline
PRINT
START
Sets sending/not sending of an
email when printing starts.
PRINT END
Sets sending/not sending of an
email when printing ends.
PLOT START
EVENT
Sets sending/not sending of an
email when plotting starts.
PLOT END
EVENT
Sets sending/not sending of an
email when plot ends.
ERROR
Sets sending/not sending of an
email when printing is stopped due
to occurrence of an error.
WARNING
Sets sending/not sending of an
email when a warning occurs
during printing.
etc.
Sets sending/not sending of an
email when an event other than the
above occurs.