Chapter6 Appendix
6-3
2
2
2
6
Ink specifications
Safety Standard
VCCI-Class A, FCC-Class A, UL 60950, CE Marking (EMC,Low Voltage Directive,
Machinery Directive, RoHS Directive), CB Report, RoHS, Energy Star, RCM, EAC
Power Single-phase AC100 - 120V/ 200 - 240V 12A/8A 50/60Hz
Power consumption 1440 W or less (AC 100 - 120 V), 1920 W or less (AC 200 - 240 V)
Recomended
Environment
Available temp. 20 °C to 30 °C (68 °F to 86 °F)
Humidity 35 to 65% Rh (No condensation)
Guaranteed temp. 20 °C to 25 °C (68 °F to 77 °F)
Temperature
change
± 10 °C / h or less (± 50 °F / h or less)
Dust Equivalent to normal office level
Highest operation
height
2,000 m (6,561.7 ft)
Weight 202 kg (445.3 lb)
Outside
dimensions
Width 3,240 mm (127.6 in)
Depth 713 mm (28.1 in)
Height 1,857 mm (73.1 in)
*1. Not compatible with 6, 7 and 8 color ink sets.
*2. It is outside diameter and weight after take-up media.
*3. Without deflection of the roll when it is retained at both ends.
Item Sublimation dye ink
Supply
2 liters ink pack
Color
Black ink pack (B)
Blue ink pack (Bl)
Magenta ink pack (M)
Yellow ink pack (Y)
Light blue ink pack (LBl)
Light magenta ink pack (Lm)
Light black ink pack (Lk)
Fluorescent yellow ink pack (FY)
Fluorescent pink ink pack (FP)
Ink capacity 2 liters
Shelf life
The period is printed on the ink pack.
Within three months after opening the package even in the available period.
Storage tem-
perature
Storage
Average daily temperature: 10 to 35°C (50 to 95°F)
Be sure to keep a vessel in the airtight condition.
Be sure to keep a vessel in a dry, well-ventilated, cool and dark location.
Transporta-
tion
0 to 40 °C (32 to 104 °F)
Avoid the condition lower than -0 °C (32 °F) and higher than 40 °C (104 °F).
• Do not disassemble ink packs and 2L eco case and do not refill them with ink.
• Ink could freeze if kept in a cold place for an extended period.
• When aqueous ink is used, if the ink freezes, the quality is changed and the ink becomes unusable.
Store the ink in an environment that will not freeze the ink.
Item TS55-1800