Mindray A5 Service Manual

Calibration Warnings, Precautions, and Notes Calibration
4 - 4 046-001141-00 A5/A3™ Service Manual
NOTE: Use surgical gloves whenever touching or disassembling valves or
other internal components of the Breathing System.
NOTE: Ensure that the gas supply of the machine always complies with the
technical specification.
NOTE: The APL Valve and PAW gauge marker are for reference only. Calibrated
patient airway pressure is available on the ventilator screen.
NOTE: If the machine should show faults during the initial calibration or
testing, the machine should not be operated until the fault has been
repaired by a qualified service technician.
NOTE: After servicing, functional, sensor and system tests must be carried out
before clinical use.
NOTE: To accommodate additional monitors and other equipment the
anesthesia offers up to two vertical mounting tracks. Use of
unauthorized mounting accessories is not recommended.
NOTE: Always secure any equipment placed on the top shelf of anesthesia

Mindray A5 Specifications

General

Type	Anesthesia Machine
Brand	Mindray
Model	A5
Power Supply	100-240 V AC, 50/60 Hz
Ventilation Modes	SIMV, PSV
Flowmeters	O2, N2O, Air
Vaporizer Capacity	Up to 3 vaporizers
Safety Features	O2 failure protection, low pressure alarm
Gas Module	Optional integrated gas module
Integrated Air Compressor	Optional
Patient Monitoring	Integrated monitoring with optional modules