Safety Getting Started
3 - 2 BP10 Operator’s Manual
3.1 Safety
• BP10 shall be installed by Mindray authorized personnel.
• The equipment software copyright is solely owned by Mindray. No
organization or individual shall resort to altering, copying, or exchanging it
or to any other infringement on it in any form or by any means without due
permission.
• Connect only approved devices to this system. Devices connected to the
equipment must meet the requirements of the applicable IEC standards (e.g.
IEC 60950 safety standards for information technology equipment and IEC
60601-1 safety standards for medical electrical equipment). The system
configuration must meet the requirements of the IEC 60601-1 medical
electrical systems standard. Any personnel who connect devices to the
equipment’s signal input/output port is responsible for providing evidence
that the safety certification of the devices has been performed in accordance
to the IEC 60601-1. If you have any questions, please contact Mindray.
• If it is not evident from the equipment specifications whether a particular
combination with other devices is hazardous, for example, due to summation
of leakage currents, please consult the manufacturers or else an expert in the
field, to ensure the necessary safety of patients and all devices concerned will
not be impaired by the proposed combination.
• Only Mindray authorized personnel can upgrade BP10.
To Next Page
Loading...
