Mindray BP10 NIBP Module - Changing Language; Changing the Passcode; Changing the Device Name

Changing Language Configuring BP10
4 - 4 BP10 Operator’s Manual
4. Press the key to save the setting.
5. Press the key to exit the menu.
4.6 Changing Language
To change the language, follow this procedure:
1. In the main menu, select System.
2. Select Maintenance, and enter the maintenance passcode.
3. In the Maintenance menu, select Language.
4. Select an appropriate language.
The message will display: Changing language will restart this device. Are you sure
you want to restart?
5. Select Ye s .
4.7 Changing the Passcode
To change the passcode, follow this procedure:
1. In the main menu, select System.
2. Select Maintenance, and enter the maintenance passcode.
3. In the Maintenance menu, select Edit Passcodes.
◆ Select Maintenance Passcode and follow the on-screen instructions to
change the maintenance password.
◆ Select Service Passcode and follow the on-screen instructions to change
the service password.
4. Select Save to save the changes.
5. Press the key to exit the menu.
4.8 Changing the Device Name
To change the device name, follow this procedure:
1. In the main menu, select System.
2. Select Maintenance, and enter the maintenance passcode.
3. In the Maintenance menu, select Device Name.
4. Enter the device name.
5. Select Save to save the setting
6. Press the key to exit the menu.