Configuring BP10 Restoring Factory Defaults
BP10 Operator’s Manual 4 - 5
• Do not set the same device name for BP10s.
4.9 Restoring Factory Defaults
You are allowed to re-establish the first time power-up settings and change the original
user and device configurations to factory defaults.
To restore the factory defaults, follow this procedure:
1. In the main menu, select System.
2. Select Maintenance, and enter the maintenance passcode.
3. In the Maintenance menu, select Restore Factory Defaults.
The following message shows: Are you sure you want to restore factory default
settings? All history data will be cleared.
4. Select Ye s .
4.10 Service Menu
The Service menu only allows an authorized service personnel to access.
To Next Page
Loading...
