Mindray BP10 NIBP Module - Unpacking and Checking; Environmental Requirements

Getting Started Unpacking and Checking
BP10 Operator’s Manual 3 - 3
3.2 Unpacking and Checking
Before unpacking, examine the packing case carefully for signs of damage. If any
damage is detected, contact the carrier or Mindray.
If the packing case is intact, open the package and remove the device and accessories
carefully. Check all materials against the packing list and check for any mechanical
damage. Contact Mindray in case of any problem.
WARNING
• Before use, please verify whether the packages are intact, especially the
packages of single use accessories. In case of any damage, do not apply it to
patients.
NOTE
• Save the packing case and packaging material as they can be used if the
device must be reshipped.
3.3 Environmental Requirements
The operating environment of the device must meet the requirements specified in this
manual.
The device operating environment should be reasonably free from noises, vibration,
dust, corrosive, flammable and explosive substances.
When the device is moved from one place to another, condensation may occur as a
result of temperature or humidity difference. In this case, never start the system before
the condensation disappears.
WARNING
• Make sure that the device operating environment meets the specifications.
Otherwise unexpected consequences, e.g. damage to the device, could
result.
NOTE
• The device transmits data through a wireless connection. External radio
frequency interference may result in occasionally data dropout. Contact
Mindray for any questions regarding the electromagnetic environment.