Mindray DC-30 Service Manual

Troubleshooting of Regular Malfunctions 11-11
The indicator on the printer adapter
turns orange, and the printing fails.
Errors occur
when the printer
adapter runs.
Disconnect and connect the
power adapter, power on the
printer adapter again, and
verify whether the printing is
normal after 1 minute.

Mindray DC-30 Specifications

General

DICOM	Yes
Hard Drive	500 GB
Continuous Wave Doppler	Yes
Tissue Harmonic Imaging	Yes
Relative Humidity	30% to 85% (non-condensing)
Imaging Modes	Color Doppler, Power Doppler
Power Supply	100-240 V~ 50/60 Hz
Probe Connectors	2 active probe connectors
Probe Types	Convex, Linear, Phased Array
Operating Temperature	10°C to 40°C
Storage Temperature	-20°C to +55°C
Transducer Ports	2