4 - 12 Operator’s Manual
4 Setup
LDAP Privilege Management
Turn on the access control function and log in to the system as Administrator before you edit
privileges for the LDAP (Lightweight Directory Access Protocol) users.
Tap [LDAP Config]:
Enable strong
password
Enable strong password to improve security.
• If the strong password is enabled and you
log in to the system with the account that is
added before the strong password is
enabled, the system prompts a warning
message to inform you whether your
password conforms to the password policy.
The administrator can change password for
administrator or operator.
• If the strong password is enabled and you
add a new user account, the system prompt
an error message to inform you that the
password is too weak,please modify the
password according to the error message.
/
Item Description Remark
Item Description
Service Address Enter the server address in the field box after accessing the network
Test LDAP Server To test whether the LDAP server is accessible. If the LDAP is
accessible, the system prompts the following message “Server test
succeeded.”
Root DN It is automatically displayed after the server is successfully tested.
Default Domain The default domain is the DC name in the Root DN. For example, if
DC=security1, then input “security1” in the field box of the “Default
Domain”
Port Enter the port of the server.
SSL The user can verify through SSL encryption method. Select “SSL”,
import SSL certificate and follow the prompt to enter password.
Days to keep cached
password
Set days to keep the cached passwords in the local system.
Users can log in to the server even without accessing the network
within the setting days.
• Empty: the passwords are kept in the local system permanently.
• 0: no passwords are kept in the local system.
• ≥1: for example, if it is set to 5, the passwords are kept in the local
system for 5 days.
To Next Page
Loading...
