Revision:1.0(2023–5–17)
66
3.
Replace the probe. For details, see the instructions for the i3P ultrasound probe (FDA) 6.1.2
Disassembly and Assembly
.
77..22..33..22 Image Freezing and Delay
Fault Description
Images freeze or the display delays.
Involved FRU
Wireless probe
Severity
Maintenance as soon as possible
Response
Contact the device provider for onsite troubleshooting.
Possible Causes
1. Your mobile phone responds slowly.
2. There is Wi-Fi interference in the environment.
3. The probe is faulty.
Troubleshooting
1. Replace the mobile phone and try again.
2. Move to a place with less interference.
3. If the problem persists, the probe is faulty.
Solution
1. Replace the mobile phone.
2. Move to a place with less interference.
3. Replace the probe. For details, see the instructions for the i3P ultrasound probe (FDA) 6.1.2
Disassembly and Assembly
.
77..22..33..33 Image Interference
Fault Description
There is interference to images displayed.
Diagnostic Ultrasound System
Service Manual
7 Troubleshooting
To Next Page
Loading...
Need help?
General
