Wireless LAN C-1
Appendix C Wireless LAN
WARNING
It is prohibited to use the wireless LAN function in airplane,
as it may violate the relevant provisions in the aviation
regulations.
2
Be prudent to use the wireless LAN function in OR/ ICU/
CCU as it may interfere with other devices.
When wireless LAN function is turned on, the ultrasound
system may be interfered with by other equipment, even if
that other equipment complies with CISPR EMISSION
requirements.
Keep a distance of at least 20cm away from the ultrasound
system when wireless LAN function is in use.
The system can be configured with wireless adapter, so as to assist information
communication.
To Use the W-LAN Function:
1. When the ultrasound system is powered off, connect the wireless adapter to the USB port
of the system.
2. Power on the ultrasound system.
3. Local TCP/IP settings in preset:
a) Press <Setup> to enter the Setup menu.
b) Move the cursor onto [Network Preset] to open the screen:
c) Local TCP/ IP preset items are described as follows:
Current Net Adapter To select net adapter type “wlan0”.