3.1.10
Image Rotation
This option will flip the image on the LCD screen 180 degrees.
1.
In Photo Mode press the MENU button.
2.
Select the Gear icon on the bottom of the left side of the screen by pressing the LEFT
button, and then pressing the DOWN button.
3.
Press the RIGHT button to enter the setup menu.
4.
Select using the UP or DOWN buttons and press the MODE/OK
button to turn Image Rotation on or off.
5.
Press the MENU button to exit the settings menu without making a selection.
3.1.11
Frequency
This function sets the frequency of the camera from 50Hz to 60Hz. Please check the
frequency of your location and set accordingly.
1.
In Photo Mode press the MENU button.
2.
Select the Gear icon on the bottom of the left side of the screen by pressing the LEFT
button, and then pressing the DOWN button.
3.
Press the RIGHT button to enter the setup menu.
4.
Select using the UP or DOWN buttons and press the MODE/OK button to
enter the menu.
5.
Press the UP or DOWN buttons to navigate the menu, and press the MODE/OK
button to confirm your selected option (Auto, 50 Hz, 60 Hz) the default frequency for
the United States is 60Hz.
6.
Press the MENU button to exit the settings menu without making a selection.
3.1.12
LED Indicator
This function allows you turn the LED status indicator on and off.
1.
In Photo Mode press the MENU button.
2.
Select the Gear icon on the bottom of the left side of the screen by pressing the LEFT
button, and then pressing the DOWN button.
3.
Press the RIGHT button to enter the setup menu.
4.
Select using the UP or DOWN buttons and press the MODE/OK
button to turn the LED Indicator on or off.
5.
Press the MENU button to exit the settings menu without making a selection.
3.1.13
Screen Timeout
This function sets the duration of time in which the camcorder will wait with no user input
before automatically turning off the LCD screen. Note: even while the screen is off, the
camera will still be powered on.
1.
In Photo Mode press the MENU button.
2.
Select the Gear icon on the bottom of the left side of the screen by pressing the LEFT
button, and then pressing the DOWN button.
3.
Press the RIGHT button to enter the setup menu.
4.
Select using the UP or DOWN buttons and press the MODE/OK
button to enter the Timeout menu.
5.
Press the UP or DOWN buttons to navigate the menu, and press the MODE/OK
button to confirm your selected option (Off, 30 Seconds, 1 Minute, 2 Minutes, 10
Minutes).
6.
Press the MENU button to exit the settings menu without making a selection.